
G.654e Cut Off Wavelength Shifted Single Mode Fiber
POTEL®CONEXESS® G654E has a large effective area and excellent attenuation performance, making it the best choice to support different transmission technologies such as Ethernet, Internet Protocol (IP), Asynchronous Transfer Mode (ATM), Synchronous Optical Network (SON ET), and Wavelength Division Multiplexing (WDM).
Description
G.654E cut off wavelength shifted single mode fiber

Product Introduction
POTEL®CONEXESS® G654E has a large effective area and excellent attenuation performance, making it the best choice to support different transmission technologies such as Ethernet, Internet Protocol (IP), Asynchronous Transfer Mode (ATM), Synchronous Optical Network (SON ET), and Wavelength Division Multiplexing (WDM).
Product Application
G654E provides low signal attenuation for long-distance optical transmission systems, meeting the requirements for optical fiber attenuation levels in ultra-long-distance transmission and providing more redundancy for the system. G654E single-mode fiber is suitable for various optical cable structures, including fiber ribbon loose tube cable, skeleton cable, central tube cable, etc.
Product Features
• Suitable for C-band (1530-1565nm) and L-band (1565~ 1625nm) 40G/100G/ultra-long-distance transmission
• The large effective area reduces non linear effects in fiber transmission, ensuring good system transmission performance
• Ultra-low attenuation, meeting the transmission requirements of ultra-long distances with high dynamic fatigue parameters
• 1550nm and more sensitive 1625nm window has low bending loss
• Excellent protective coating and superior peel ability
• Precise geometric parameters ensure low fusion loss and high fusion efficiency.
Product Performance Parameters
|
Characteristic |
Condition |
Data |
Unit |
|
|
Optical features |
||||
|
Attenuation |
1310nm |
≤0.344 |
[dB/km] |
|
|
1383nm(After hydrogen aging) |
≤0.344 |
[dB/km] |
||
|
1550nm |
≤0.204 |
[dB/km] |
||
|
1625nm |
≤0.24 |
[dB/km] |
||
|
Attenuation change relative towavelength |
1285-1330nm,compared to 1310nm |
≤0.05 |
[dB/km] |
|
|
1525-1575nm,comparedto 1550nm |
≤0.05 |
[dB/km] |
||
|
Dispersion in the wavelength range |
1285-1340nm |
≤3.5 |
[ps/(nm ·km)] |
|
|
1550nm |
≤18 |
[ps/(nm ·km)] |
||
|
1625nm |
≤22 |
[ps/(nm+km)] |
||
|
zero dispersionwavelength(λO) |
-- |
1300~1324 |
[nm] |
|
|
Zero dispersionslope(SO) |
-- |
≤0.092 |
[ps/(nm2-km)] |
|
|
Polarization Mode Dispersion Coefficient (PMD) |
single fiber maximum |
-- |
≤0.1 |
[ps/(km)1/2] |
|
Fiber link value (M=20,Q=0.01%) |
-- |
≤0.06 |
[ps/(km)1/2] |
|
|
Typical value |
-- |
0.03 |
[ps/(km)1/2] |
|
|
Cable cut-off wavelength(λcc) |
-- |
≤1260 |
[nm] |
|
|
Modefield diameter(MFD) |
1310nm |
8.8~9.6 |
[μm] |
|
|
1550nm |
9.8~10.8 |
[μm] |
||
|
Effective group index of refraction (Neff) |
1310nm |
1.466 |
||
|
1550nm |
1.467 |
|||
|
Point discontinuity |
1310nm |
≤0.05 |
[dB] |
|
|
1550nm |
≤0.05 |
[dB] |
||
Geometric properties
|
Claddingdiameter |
-- |
125.0±0.7 |
[μm] |
|
Cladding out-of-roundness |
≤1.0 |
[%] |
|
|
Coating diameter |
235~250 |
[μm] |
|
|
Cladding/CoatingConcentricity Error |
≤12.0 |
[μm] |
|
|
Coating out-of-roundness |
≤6.0 |
[%] |
|
|
Core/Clad Concentricity Error |
-- |
≤0.6 |
[μm] |
|
Warpage(Radius) |
- |
≥4 |
[m] |
|
Delivery length |
up to 50.4 |
[km/tray] |
Environmental characteristics 13010nm,1550nm and 1625nm
|
Temperature Additional Attenuation |
-60℃to 85℃ |
≤0.05 |
[dB/km] |
|
emperature-Humidity Cycling Additional Attenuation |
-10℃to 5℃,98%RH |
≤0.05 |
[dB/km] |
|
Water immersion additional attenuation |
23℃,30 days |
≤0.05 |
[dB/km] |
|
Thermal additional attenuation |
85℃,85%relative humidity,30 days |
≤0.05 |
[dB/km] |
|
dry heat aging |
85℃,30 days |
≤0.05 |
[dB/km] |
Mechanical properties
|
Screening tension |
≥9.0 |
[N] |
||
|
-- |
≥1.0 |
[N] |
||
|
≥100 |
[kpsi] |
|||
|
30mm 100 turns,radius 30mm |
1625nm |
≤0.05 |
[dB] |
|
|
Macrobending additional loss |
25mm 100 turns,radius25mm |
1310nm and 1550nm |
≤0.05 |
[dB] |
|
16mm 1 turn,radius 16mm |
1550nm |
≤0.05 |
[dB] |
|
|
typical average |
≥1.0 |
[N] |
||
|
Coatingpeel force |
peak |
1.3~8.9 |
[N] |
|
|
dynamic fatigue Parameter (nd) |
≥20 |
|||
Hot Tags: g.654e cut off wavelength shifted single mode fiber, China g.654e cut off wavelength shifted single mode fiber manufacturers, single mode duplex fiber optic cable, types of optical fiber, pof fiber, LC multi 6 core single mode outdoor fiber optic cable, fiber innerduct, corning fiber optics
Send Inquiry
You Might Also Like
-

G.657.a1 Bend Insensitive Single Mode Fiber
-

G.652d Low Water Peak Non Dispersion Shifted Single ...
-

G.655 Large Effective Area Non Zero Dispersion Shift...
-

G.657.a2 Bend Insensitive Single Mode Fiber
-

G.657.b3 Ultra Bend Insensitive Single Mode Optical ...
-

Cat.6 Shielded Small Outer Diameter High-density Pat...
