Key points for construction and installation of single-mode optical fiber

Due to the fact that the fiber core of the optical fiber is made of quartz glass, it is highly prone to breakage. Therefore, when bending during construction, it is never allowed to exceed the minimum bending radius. Secondly, the tensile strength of optical fibers is smaller than that of cables, so when operating optical cables, it is not allowed to exceed the tensile strength of various types of optical cables.

After the fiber optic cables are laid, they are bundled together in the equipment room and floor distribution room before fiber optic connections are made. Modular connections can be established using fiber optic termination devices (OUT), fiber couplers, and fiber optic connector panels. After the installation of the optical cable is completed and the interconnection module is established in the appropriate position, the fiber optic connector can be added to the end of the fiber optic cable and the fiber optic connection can be established.